Over 30 years' experience · All trades in-house · Fully insured Call 07811 466054
Kitchen Splashbacks: Tiles, Glass and Panels, Fitted Properly — work by Barbers Bathrooms & Kitchens
Kitchens

Kitchen Splashbacks: Tiles, Glass and Panels, Fitted Properly

The splashback is the wall you look at most in a kitchen and the one that takes the most steam, grease and water. We fit tiled, glass and panel splashbacks, either as part of a new kitchen or on their own to freshen up an existing one.

What Is Kitchen Splashbacks?

A kitchen splashback is the protective, wipe-clean surface on the wall between the worktop and the wall units, and especially behind the hob and sink. It stops water and cooking splashes soaking into the plaster and gives the kitchen much of its look.

There are four common kinds: ceramic or porcelain tiles, toughened glass, solid-surface or quartz to match the worktop, and splashback panels in acrylic, laminate or composite. They differ in cost, in how they handle heat behind a hob, in how many joints there are to clean, and in how flat the wall has to be before they go on.

Black composite sink and induction hob under a window with a brick splashback
Who it suits

Is Kitchen Splashbacks Right for You?

  • New kitchens, where the splashback is chosen with the worktop and doors
  • Existing kitchens with tired or dated tiles that are otherwise sound
  • Rented properties that need a hard-wearing, easy-to-clean finish
  • Kitchens with a new induction or gas hob that needs a heat-safe surface behind it

A tiled splashback in a typical kitchen takes 1 to 2 days including grouting and sealing. Glass splashbacks are templated on one visit and fitted on a second, usually 7 to 10 days later. Panels can normally be fitted in a day.

Galley kitchen with a black sink, induction hob and brick-effect splashback
Scope

What Our Kitchen Splashbacks Includes

What is included as standard?

  • Removing old tiles and making good the plaster behind
  • Wall tiling, from metro and brick-effect to large-format porcelain
  • Toughened glass splashbacks measured, templated and fitted
  • Quartz or solid-surface upstands to match the worktop
  • Splashback panels in acrylic, laminate or composite
  • Sockets and switches moved or fitted flush with the new finish
  • Silicone sealing to the worktop and around fittings

Part of a bigger job?

Kitchen Splashbacks is often done alongside a wider project — see kitchen installation.

Original tiled kitchen with a range cooker in an arched recess, before renovation
Handleless dark blue kitchen with an island, white worktops and a tiled floor
Dark blue handleless kitchen with built-in ovens and under-cabinet lighting
Worth knowing

What Decides Whether Kitchen Splashbacks Works in Your Home?

Which kitchen splashback is best?

For most kitchens, tiles are the most forgiving and the easiest to repair, glass is the easiest to keep clean and has no grout lines, and a quartz upstand gives a seamless look with a stone or quartz worktop. Panels are the quickest to fit and suit rentals. Behind a gas hob, glass must be toughened and heat-rated, and acrylic panels should not go there at all.

The wall decides the finish

Glass and large panels show every bump in the wall behind them. In older houses where the plaster is uneven, we either skim the wall first or recommend tiles, which can be bedded to take out small irregularities. Our plasterers and tilers are the same team, so the wall is prepared properly rather than covered over.

Glass is measured after the worktop is in

A glass splashback is cut to size and toughened at the factory, so it cannot be trimmed on site. We template it once the worktop and wall units are fitted and every socket position is fixed, which usually means it goes in a week or so after the rest of the kitchen.

Where we work

Where Do We Offer Kitchen Splashbacks?

What Does Kitchen Splashbacks Cost?

We price kitchen splashbacks after seeing the room, in writing.

Newly fitted navy kitchen with a brick-effect splashback, protective film still on
Free · No obligation

How do I get a fixed quote for kitchen splashbacks?

Postcode and a line about the job is plenty.

Rather talk? Call 07811 466054 or message us on WhatsApp. Mon–Fri 7:30am–8:30pm.

Good to know

Frequently Asked Questions About Kitchen Splashbacks

Can you fit a splashback without replacing the kitchen?
Yes. A new splashback is one of the quickest ways to change how a kitchen looks. We take off the old tiles, make good the plaster, and fit the new tiles, glass or panels, moving sockets to suit if needed. It pairs well with new kitchen doors if the units are sound.
Can a splashback go behind a hob?
Tiles, toughened glass and quartz can all go behind a hob. Glass must be toughened and rated for the heat, and gas hobs need the clearances in the hob manufacturer's instructions. We would not fit an acrylic panel behind a gas hob.
Do I need tiles behind the whole worktop?
Not necessarily. Many kitchens have a full-height splashback behind the hob and sink and a short upstand of about 10cm along the rest of the worktop, which protects the wall where splashes actually happen and keeps the cost down. We will show you both options on the plan.
Contact us

Barbers Bathrooms & Kitchens

Creswell, Derbyshire Service area business — we work in your home

We cover a 30-mile radius of Creswell, including Worksop, Clowne, Bolsover, Mansfield, Chesterfield, Retford, Sheffield and Nottingham. There is no travel charge anywhere within that area.

Phone
07811 466054
Hours
Monday to Friday: 7:30am – 8:30pm
Call now WhatsApp Free quote